Single or Dual Colour (CCT) Dimmer Remote
Features
WiFi Control (requires LL-WiFiBox)
Single or Dual Colour (CCT) Dimmer Remote
Features
WiFi Control (requires LL-WiFiBox)
Single or Dual Colour (CCT) Dimmer Remote
Features
WiFi Control (requires LL-WiFiBox)
Dual Colour (CCT-Colour Temperature) Wireless Receiver
Features
WiFi Control (requires LL-WiFiBox)
Smart LED Deck Light RGBW 3W
Features
WiFi Control (requires LL-RE-WiFi or LL-RE-WIFI-VOICE)
Zigbee Control (requires Zigbee RF Bridge)
This deck light requires five wire cable. All lights are wired to a RGBW controller (sold separately).
Smart LED Garden Light RGB+CCT 6W
Features
WiFi Control (requires LL-RE-WiFi or LL-RE-WIFI-VOICE)
Zigbee Control (requires Zigbee RF Bridge)
This garden light only requires two wires (+ & – 24VDC), there are no signal wires needed. The signal is transmitted over RF (up to 30m). This means these lights can be retrofitted into an old existing installation where only 2 core cable has been used.
Smart LED Wall Washer RGB+CCT 24W
This LED wall washer only requires two wires (+ & – 24VDC), there are no signal wires needed. The signal is transmitted over RF (up to 30m). This allows installation in difficult locations requiring only 2 core cable to be used.
Smart LED Garden Light RGB+CCT 9W
Features
WiFi Control (requires LL-RE-WiFi or LL-RE-WIFI-VOICE)
Zigbee Control (requires Zigbee RF Bridge)
This garden light only requires two wires (+ & – 24VDC), there are no signal wires needed. The signal is transmitted over RF (up to 30m). This means these lights can be retrofitted into an old existing installation where only 2 core cable has been used.
Smart LED Floodlight RGB+CCT 10W
This floodlight only requires two wires (+ & – 24VDC), there are no signal wires needed. The signal is transmitted over RF (up to 30m). This means these lights can be retrofitted into an old existing installation where only 2 core cable has been used.
Smart LED Floodlight RGB+CCT 20W
This floodlight only requires two wires (+ & – 12VDC), there are no signal wires needed. The signal is transmitted over RF (up to 30m). This means these lights can be retrofitted into an old existing installation where only 2 core cable has been used.
Smart LED Floodlight RGB+CCT 30W
This floodlight only requires two wires (+ & – 12VDC), there are no signal wires needed. The signal is transmitted over RF (up to 30m). This means these lights can be retrofitted into an old existing installation where only 2 core cable has been used.
Smart LED Floodlight RGB+CCT 50W
This floodlight only requires two wires (+ & – 24VDC), there are no signal wires needed. The signal is transmitted over RF (up to 30m). This means these lights can be retrofitted into an old existing installation where only 2 core cable has been used.
Smart LED Floodlight RGB+CCT 50W (Narrow Beam)
Features
WiFi Control (requires LL-RE-WiFi or LL-RE-WIFI-VOICE)
Zigbee Control (requires Zigbee RF Bridge)
This garden light only requires two wires (+ & – 24VDC), there are no signal wires needed. The signal is transmitted over RF (up to 30m). This means these lights can be retrofitted into an old existing installation where only 2 core cable has been used.
Smart LED Floodlight RGB+CCT 100W
This floodlight only requires two wires (+ & – 24VDC), there are no signal wires needed. The signal is transmitted over RF (up to 30m). This means these lights can be retrofitted into an old existing installation where only 2 core cable has been used.
Smart LED Floodlight RGB+CCT 100W (Narrow Beam)
This floodlight only requires two wires (+ & – 24VDC), there are no signal wires needed. The signal is transmitted over RF (up to 30m). This means these lights can be retrofitted into an old existing installation where only 2 core cable has been used.
LED Garden Light RGB+CCT 15W
Features
WiFi Control (requires LL-RE-WiFi or LL-RE-WIFI-VOICE)
Zigbee Control (requires Zigbee RF Bridge)