uPowerTek’s BLD-050-C140-DNS is a 50W constant current 0-10V dimmable LED driver. This driver’s output current can be set anywhere from 70mA to 1400mA, however full power is achieved between 1050~1400mA. The driver’s required current output is programmed by Linear Lux prior to shipping. Once the driver is programmed to the desired current output, it is then set and forget. However the driver can be reprogrammed to another current output if required. No other driver in Australia has this level of user flexibility.
Programming
The DNS series is programmed using proprietary software and a wired dongle connected to the dimming control wires. The ERS series can be programmed using the same software and a wired Airset™ NFC dongle, or by using and Android device. (NFC – Near-Field Communication is a set of communication protocols for communication between two electronic devices over a distance of 4 cm or less).
Sample view of programming software
uPowerTek’s BLD-C series LED drivers offer some of the most advanced features available on the market. These include; industry leading 8 year warranty, 100,000hr lifetime, 10kV surge protection, ultra compact design, high operating temperature and IP67 environmental rating.
Designed as an enclosed, fanless LED driver it is suits both indoor and outdoor (wet) environments, with a protection rating of IP67. Despite the omission of a cooling fan the driver can operate at full output up to a case temperature of 75°C.
The compact design allows for installation where space is a premium or the driver is to be hidden in places such as ceiling coffers.
Dimmable models are available in 0∼10V, DALI, PUSH or DMX, all dimmable models feature PWM output.
Why is PWM output important?PWM dimming does not require load matching, this means you will always have consistent, full range dimming regardless of driver capacity and/or load. It also allows for identical dimming levels using different size drivers operated by the same dimmer. Meaning, you can have a 150W driver operating a 90W load and a 100W driver operating a 90W load, with both LED luminaries dimming at the same rate. Offering 0-100% dimming and no flicker.
All uPowerTek BLD series LED drivers are fitted with Australian mains plug and are RCM approved.
uPowerTek BLD-050-C140-DNS 50W 700~1050mA 0-10V Dimmable LED Driver
Features
Constant current:
1050~1400mA (50w)
<1050mA (<50W) see Output Range tab
Max. output power: 50W
0-10V dimmable
High efficiency
Wide input voltage range
10kV surge protection
Compact design
Dry, damp and wet locations – IP67
Nominal life-time of 100,000hr @ Tc=75℃
8 year warranty @ Tc=75℃
Protections
Over temperature
Overload
Short-circuit
The BLD & TLD CC series are available in the following sizes:
