This trailing edge LED rotary dimmer mech allows you to dim LED strip light using a standard wallplate. No complex signal wires needed like when using 1-10V or DALI dimming protocols. This dimmer is wired in between the mains AC side and the LED driver, much like a typical light switch.
Suits most Clipsal & HPM wallplates.
- Trailing edge phase control dimming
- Soft-start prolongs driver life
- Immune to high frequency (ripple) signal injection from the AC side
- Maximum load 350VA
- Short circuit protection
Compatible with the PDV constant voltage driver series
|Function||Trailing Edge Phase Control Dimmer|
|Wallplate Types||Suits standard Clipsal & HPM|
|Operating Voltage||220~240 VAC|
|Operating Frequency||50 Hz|
|Maximum Load||350 VA @ 1 Gang |
Reduce for multiple gang installations
|Minimum Load||10 VA|
|Safety Compliance||AS/NZS 3100, AS/NZS 3133, IEC 60669-2-1 |
|Safety Protrections||Over-current & thermal fuse cut-off (non recoverable) |
Capable of withstanding persistent short circuit
|Environment||Indoor use only|
- LL-CON-TRROT User Manual (676 KB)
Only logged in customers who have purchased this product may leave a review.