LED Strip Light Connector 8mm 2-Way IP20 | Wire to Strip
210 in stock (can be backordered)
Description
Easily connect power wires to LED strip light by using these simple to use, robust connectors. No wire strippers or soldering iron required, just pliers to crimp the connector.
Rather than using metal tabs that make surface contact with the LED strip, these connectors pierce through the FPCB. This method makes a much more reliable electrical connection as well as firmly securing the FPCB.
Suits 8mm wide, single colour, IP20 (no silicone coating) LED strip light.
To be used with our Series 1, Series 3 and Series 5 models of LED strip light.
Specifications
LL-SC-8BX2 | |
---|---|
Type | Wire to Strip IP 20 (Non coated LED Strip) |
LED Strip Width | 8mm |
Conductors | 2 Pin (Single Colour) |
Cable Size | 0.34~0.75mm 22~20 AWG |
Length | 24.3mm |
Width | 12.6mm |
Height | 7.7mm |
IP Rating | 20 |
Instructions
Step 1
Cut LED Strip along to the desired length
Step 2
Remove backing from double sided tape
Step 3
Insert the LED strip into the connector & close connector with pliers
Step 4
Ensure the cap is fully closed
Step 5
Fully insert all wires into the other side of the connector & close connector with pliers
Note: do not remove the insulation from the wires
Step 6
Ensure the connector is firmly locked together