In-Profile Hand Wave Dual Colour Switch & Dimmer
$41.80 Inc GST
50 in stock
LL-CON-PR-PS05
Description
This LED profile dual colour proximity switch & dimmer module allows you to change from one colour to another as well as dim each each colour. Turn on or off by waiving your hand over the sensor. Change colour by passing your hand over the sensor twice. Dim up or down by holding your hand over the sensor. This works with any dual colour constant voltage strip light; i.e. cool and warm, white and blue, white and red, etc.
Function
- On/Off = Wave hand over sensor
- Change colour = Wave hand over sensor twice (back and forth)
- Dim up/down = Hold hand over sensor (1 sec)
Dimmer module will memorise the level of last brightness, even after power loss.
This dimmer module is designed to be mounted within the aluminium profile.
Specifications
Electrical Data | |
---|---|
Input Voltage | 12.0 ~ 24.0 VDC |
Input Current | 4 A / Ch 8 A total |
Output Voltage | 12.0 ~ 24.0 VDC |
Output Load | 96W @ 12V / 192W @ 24V |
Operation | |
On / Off | Pass hand over sensor |
Change Colour | Pass hand over sensor twice |
Dim Up/Down | Hold hand over sensor – 1 sec (0~100%) |
Memory Brightness Level | Yes, even with loss of power |
Sensor Detection Range | < 10cm |
Construction / Protection Data | |
Substrate | PCB |
Mounting | Double sided tape |
IP rating | IP20 |
Operating Temperature | -20 ~ +60 C° |
Storage Temperature | -20 ~ +50 C° |
Dimensions | |
Length | 55 mm |
Width | 10 mm |
Height | 5 mm |
Downloads
- PS05 Technical Data Sheet (1.5 MB)
Related products
91 in stock
26 in stock
Latest products
250 in stock
214 in stock
296 in stock
297 in stock
94 in stock
99 in stock