Description

uPowerTek’s BLD-100-C105-DNS is a 100W constant current 0-10V dimmable LED driver.  This driver’s output current can be set anywhere from 70 to 1050mA, however full power is achieved between 700~1050mA.  The driver’s required current output is programmed by Linear Lux prior to shipping.  Once the driver is programmed to the desired current output, it is then set and forget.  However the driver can be reprogrammed to another current output if required.  No other driver in Australia has this level of user flexibility.

Programming

The DNS series is programmed using proprietary software and a wired dongle connected to the dimming control wires.  The ERS series can be programmed using the same software and a wired Airset™ NFC dongle, or by using and Android device.  (NFC – Near-Field Communication is a set of communication protocols for communication between two electronic devices over a distance of 4 cm or less).

uPowerTek’s BLD-C series LED drivers offer some of the most advanced features available on the market.  These include; industry leading 8 year warranty, 100,000hr lifetime, 10kV surge protection, ultra compact design, high operating temperature and IP67 environmental rating.

Designed as an enclosed, fanless LED driver it is suits both indoor and outdoor (wet) environments, with a protection rating of IP67.  Despite the omission of a cooling fan the driver can operate at full output up to a case temperature of 75°C.

The compact design allows for installation where space is a premium or the driver is to  be hidden in places such as ceiling coffers.

Dimmable models are available in 0∼10V, DALI, PUSH or DMX, all dimmable models feature PWM output.

Why is PWM output important?  PWM dimming does not require load matching, this means you will always have consistent, full range dimming regardless of driver capacity and/or load.  It also allows for identical dimming levels using different size drivers operated by the same dimmer.  Meaning, you can have a 150W driver operating a 90W load and a 100W driver operating a 90W load, with both  LED luminaries dimming at the same rate.  Offering 0-100% dimming and no flicker.

All uPowerTek BLD series LED drivers are fitted with Australian mains plug and are RCM approved.

uPowerTek BLD-100-C105-DNS 100W 700~1050mA 0-10V Dimmable LED Driver

Features

• Constant current:
  • 700~1050mA (96w)
  • <700mA (<96W) see Output Range tab
• Max. output power: 96W
• 0-10V dimmable
• High efficiency
• Wide input voltage range
• 10kV surge protection
• Compact design
• Dry, damp and wet locations – IP67
• Nominal life-time of 100,000hr @ Tc=75℃
• 8 year warranty @ Tc=75℃

Protections

• Over temperature
• Overload
• Short-circuit

The BLD & TLD CC series are available in the following sizes:

50W  60W  75W  100W  120W  150W  200W  240W  320W  400W  480W  600W  800W

Linear Lux is the Australian uPowerTek Distributor

Who is uPowerTek?

We encourage you to compare uPowerTek’s BLD / TLD series against any other LED driver for both performance and price.