LED Strip Light Connector 10mm 2-Way HD IP20 | Wire to Strip
155 in stock
Description
Easily connect power wires to LED strip light by using these simple to use, robust connectors. No wire strippers or soldering iron required, just pliers to crimp the connector.
Rather than using metal tabs that make surface contact with the LED strip, these connectors pierce through the FPCB. This method makes a much more reliable electrical connection as well as firmly securing the FPCB.
Suits 10mm wide, single colour, 240 LEDs/m, IP20 (no silicone coating) LED strip light only.
To be used with our Series 7 model of LED strip light only.
Specifications
LL-SC-10BX2HD | |
---|---|
Type | Wire to Strip 240 LEDs/m IP 20 (Non coated LED Strip) |
LED Strip Width | 10mm |
Conductors | 2 Pin (Single Colour) |
Cable Size | 0.34~0.75mm 22~20 AWG |
Length | 24.3mm |
Width | 14.6mm |
Height | 7.7mm |
IP Rating | 20 |
Instructions
Step 1
Cut LED Strip along to the desired length
Step 2
Remove backing from double sided tape
Step 3
Insert the LED strip into the connector & close connector with pliers
Step 4
Ensure the cap is fully closed
Step 5
Fully insert all wires into the other side of the connector & close connector with pliers
Note: do not remove the insulation from the wires
Step 6
Ensure the connector is firmly locked together