Easily connect power wires to LED strip light by using these simple to use, robust connectors. No wire strippers or soldering iron required, just pliers to crimp the connector.
Rather than using metal tabs that make surface contact with the LED strip, these connectors pierce through the FPCB. This method makes a much more reliable electrical connection as well as firmly securing the FPCB.
Suits 10mm wide, RGB colour changing, IP56 (dome silicone coating) LED strip light. This connector must be suitably waterproofed after application.
|Type||Wire to Strip |
IP 20 (Non coated LED Strip)
|LED Strip Width||10mm|
|Conductors||4 Pin (RGB)|
|Cable Size||0.34~0.75mm |
Cut LED Strip along to the desired length
Remove backing from double sided tape
Insert the LED strip into the connector & close connector with pliers
Ensure the cap is fully closed
Fully insert all wires into the other side of the connector & close connector with pliers
Note: do not remove the insulation from the wires
Ensure the connector is firmly locked together
Only logged in customers who have purchased this product may leave a review.