Description

uPowerTek’s APD-075-C105-ARE is a 75W constant current D4i, DALI-2 and 0-10V dimmable LED driver.  This driver’s output current can be set anywhere from 65 to 1050mA, however full power is achieved between 650~1050mA.  The driver’s current output and other parameters are programmed using NFC from a PC attached antenna or by mobile phone.  Once the driver is programmed, it is then set and forget.  However the driver can be reprogrammed to another current output if required.

uPowerTek’s Programmable Functions
uPowerTek LED drivers offer a range of configurable functions to meet specific lighting requirements. The Output Current, Dimming Mode, Dim Off/On Voltage Threshold, and Timer Dimming can be set as basic programming
functions. Constant Lumen Output (CLO) can also be customized to ensure consistent light performance.
Additionally, depending on the different product model numbers, users can benefit from programming Thermal Protection by external NTC (with extra cable), DALI/D4i Features, and DMX addressing.

Required Programming Equipment
To program uPowerTek LED drivers, users will need specific equipment based on their preferred method. For NFC wireless programming, users can use a smartphone with either IOS or Android, the uPowerTek NFC Programmer,
or the FEIG NFC Programmers. These tools ensure a seamless and efficient setup process, realising precise customization of the LED driver settings.

uPowerTek Software Download Links

uPowerTek APD-075-C105-ARE 75W 650~1050mA D4i, DALI-2, 0-10V Dimmable LED Driver

Features

• Constant current:
  • 650~1050mA (75W)
  • <450mA (<75W) see Output Range tab
• Max. output power: 75W
• D4i / DALI-2
• 0-10V dimmable
• High efficiency
• Wide input voltage range
• 10kV surge protection
• Compact design
• IP20
• Nominal life-time of 100,000hr @ Tc=75℃
• 7 year warranty @ Tc=75℃

Protections

• Over temperature
• Overload
• Short-circuit