0 items
No products in the cart.
24 in stock
This LED profile PIR motion + light switch will only turn on when a body is detected within 2m during low ambient light (night time). The light will remain on when within the detection range, and turn off 40 sec after leaving. The light sensitivity can be adjusted from 2-60 lux. Eliminating the need for a traditional on/off wall switch or remote control.
Function
This dimmer module is designed to be mounted within the aluminium profile.
Electrical Data | |
---|---|
Input Voltage | 12.0 ~ 24.0 VDC |
Input Current | 8 A |
Output Voltage | 12.0 ~ 24.0 VDC |
Output Load | 96W @ 12V / 192W @ 24V |
Operation | |
Detection Range | <2m |
Light Sensor Adj | 2~60 lux |
On Time Whilst Present | Always |
Off | 40 sec after leaving detection range |
Construction / Protection Data | |
Substrate | PCB |
Mounting | Double sided tape |
IP rating | IP20 |
Operating Temperature | -20 ~ +60 C° |
Storage Temperature | -20 ~ +50 C° |
Dimensions | |
Length | 57 mm |
Width | 10 mm |
Height | 20 mm |
Contact us for data sheet
Contact us by phone, e-mail or mail
1-2/40 Proprietary St, Tingalpa, Qld, Australia
Mon - Fri 7:30am - 4:30pm
Call: 07 3067 7466
© 2024 Linear Lux, all rights reserved
Linear Lux Pty Ltd
ABN 42 668 405 070