Description

The Tridonic LC <10W 150–400mA bDW SC PRE2 is a constant current basicDIM Wireless dimmable linear LED Driver.  User selectable output current is defined by pluggable resistors.  The value of the resistor corresponds to the current output of the driver.

Typical values of  150mA, 175mA, 200mA, 225mA, 250mA, 275mA, 300mA, 325mA, 350mA, 375mA or 400mA.  The output current can also be set in 1mA steps by ready2mains™

basicDIM Wireless allows Bluetooth connectivity with CASAMBI compatible control devices.  A simple push button can also be used for on/off and dimming operation, however the cable length can be no longer than 1m.

LC 10W 150–400mA bDW SC PRE2    28002411

Features

• Compact plastic case design (30H x 43W x 130L mm)
• Can be either used as built-in (Class I) or independent (Class II) with clip-on strain relief
• User selectable output currents, see Output & Resistor Selection table
• Output current can also be set in 1-mA-steps (ready2mains)
• Wireless CASAMBI control
• 1~100% dimming
• Constant light output function (CLO)
• Power-up fading & fade2zero
• Over temperature, short-circuit, overload, no-load protection
• Nominal lifetime up to 100,000 h
• 5 year warranty

basicDIM Wireless Explained

The Casambi Ready basicDIM Wireless control technology allows versatile and professional interaction with all luminaires within an area – fully intuitive and with no additional wiring required. The basis for the wireless light management is found in the luminaire with the LED module, a 24 V constant voltage or DALI driver and one of the basicDIM Wireless modules. Users can
choose whether to control the lighting using the 4remote BT App or via the basicDIM Wireless User Interface. Up to 250* basicDIM Wireless devices can be conveniently controlled in one network via Bluetooth® wireless technology: switching on and off as well as dimming functions are just as simple as grouping luminaires and creating lighting settings. Tunable White
luminaires change their colour temperature to suit the user. All the elements for integrating sensors are also in place. Each device can connect to one or multiple other devices (mesh connection) when added to a network.

* only possible with devices which contain the new nRF52 microcontroller.